Zodiaq® is engineered with pure quartz crystals, which lets you bring the best of both worlds- nature & science to your kitchen, bath and throughout your home.
Zodiaq® is non-porous, which allows for easy cleaning and making it safe for food preparation and will never need to be sealed.
Zodiaq® can be used for and is not limited to the following:
Shower Seats, Thresholds, & Shelves
Work Stations & Desk Tops
Wet Bar Areas
Anywhere you need a clean, non-porous and water-resistant surface that is both attractive and durable. Quartz is not recommended for outside applications and cannot be used for fireplace hearths and surrounds.
To compliment your countertop, the following bowl options are available at Keystone Bowls:
Keystone® Granite Composite Undermount Bowls
Keystone® Stainless Steel Undermount Bowls
Keystone® China Vanity Bowl
Corian® Undermount Bowls
Mounting of customer provided bowls also available.
For more information on mounting bowls to this product, refer to Quartz Surface Mounting Options.
DuPont™ provides a vast selection of solid surface bowls to choose from. With the variety of colors available, coordinating your bowl to your wishes provides boundless options. With proper care and maintenance, your bowl will last a lifetime.
Mounting of customer provided bowls is also available.
Can be integrated into a Corian countertop
Can be mounted to Corian, Zodiaq, or Natural Stone materials
Sink bowls have a 3 ½” drain hole and accept all standard drain hardware, including waste disposal units.
Vanity bowls have a 1 ¾” drain hole and accept all standard drain hardware.
Available in the following colors unless otherwise noted:
Solid Surface bowls are the only bowls available to provide this seamless look to Solid Surface countertops.
Please see our Mounting Options for all materials.
Blume’s offers two mounting solutions for bowls. Some bowls can only be mounted one of these two ways and it is important that you are aware of this for your final product. Please see the mounting solutions for each of our materials.
Under mount bowls, stainless steel, cast iron, China, and composites are mounted to Quartz & Soapstone one of two ways, A-Mount or B-Mount. Some bowls can be mounted either way; however some bowls can only be mounted one way. Please consult the manufacturer or Blume’s® for options.
With the “Gravity Sink™” you have contiguous lines at the “Stone to Stainless” transition
point. This means there is no need for the old toothbrush to clean these areas.
DuPont™ Zodiaq® quartz surfaces are very easy to maintain. The quartz used in Zodiaq®– coupled with high-performance,
stain-resistant polymers - result in durable, nonporous, chemical-resistant surface. Zodiaq® is also heat- and scratchresistant,
but not heat- and scratch- proof. Therefore, the use of a cutting board is recommended when using a knife. Of course, Zodiaq® keeps its lustrous gloss and ultra-smooth surface without polishing. Because Zodiaq® is nonporous, it does not require sealants or waxes.
With simple care, Zodiaq® will retain its radiant, lustrous appearance for many years. For routine cleaning, use a damp cloth or
paper towel and, if necessary, a small amount of non-bleach, nonabrasive cleanser.
Even though Zodiaq® resists permanent staining when exposed to liquids (such as wine, vinegar, tea, lemon juice and soda) or
fruits and vegetables, wipe up food and liquid spills as soon as possible.
For stubborn or dried spills, use a nonabrasive cleaning pad such as a white 3M Scotch-Brite* scrub pad coupled with Formula
409 Glass & Surface Cleaner** or a comparable cleaning product.
*Scotch-Brite is a registered trademark of the 3M Company
**Formula 409 Glass & Surface cleaner is a registered trademark of the Clorox Company
Zodiaq® can withstand exposure to normal cooking temperatures from pots, pans and dishes without being damaged. To
maintain the beauty of Zodiaq®, do not place hot skillets or roasting pans directly onto the surface. DuPont™ recommends the
use of trivets and hot pads.
Sometimes spills occur and dry on the countertop. For materials that harden as they dry (such as gum, food, grease, nail polish
or paint), remove by gently scraping away the excess with a plastic putty knife.
Permanent markers and inks may adhere to the surface and should be avoided. Should these agents come into contact with the
surface, clean first as outlined in Routine Care.
If the stain persists, moisten a cloth with Greased Lightning®**, or a comparable product and rub it into the stain. Let the
cleaning agent sit for 15 minutes and wipe the surface clean with a cotton cloth. Rinse thoroughly to remove any cleaner
Avoid exposing Zodiaq® quartz surfaces to strong chemicals and solvents, especially paint removers or furniture strippers
containing trichlorethane or methylene chloride. Keep nail polish remover, bleach, bluing, permanent markers or inks, and oil
soaps away from Zodiaq®. Highly alkaline (high-pH) cleansers are not recommended when cleaning Zodiaq®.
If any of the substances listed above come into Zodiaq®, rinse the exposed surface immediately and thoroughly with water.
**Greased Lightning® is available through major department and hardware stores.PRINTABLE VIEW